toyota

Let's Go Places with intention and integrity

86

The Toyota 86 and the Subaru BRZ are 2+2 sports cars jointly developed by Toyota and Subaru, manufactured at Subaru's Gunma assembly plant. The 2+2 fastback coupé is noted for its naturally-aspirated boxer engine, front-engined, rear-wheel-drive configuration, 53/47 front/rear weight balance and low centre of gravity — and for drawing inspiration from Toyota's earlier AE86, a small, light, front-engine/rear-drive Corolla variant widely popular for Showroom Stock, Group A, and Group N, Rally, Club and drift racing.

MR2

The Toyota MR2 is a two-seat, mid-engined, rear-wheel-drive sports car manufactured in Japan and marketed globally by Toyota from 1984 to 2007 over three generations: W10 (1984–1989), W20 (1990–1999) and W30 (2000–2007). It is Japan's first mid-engined production car. Conceived as a small, economical and sporty car, the MR2 employed straightforward design elements, including fully independent MacPherson strut front and rear suspensions, four-wheel disc brakes, and a transverse-mounted inline-four engine.

Supra

The Toyota Supra is a sports car and grand tourer manufactured by Toyota Motor Corporation beginning in 1978. The name "supra" is derived from the Latin prefix, meaning "above", "to surpass" or "go beyond".

MK1

The first generation of the Supra was based largely upon the Toyota Celica liftback, but was longer by 129.5 mm (5.10 in). The doors and rear section were shared with the Celica but the front panels were elongated to accommodate the Inline-6 instead of the Celica's 4-cylinder engine. Toyota's original plan for the Supra at this time was to make it a competitor to the very popular Datsun (now Nissan) Z-car.

MK2

In mid 1981, Toyota completely redesigned the Celica Supra as well as the entire Celica lineup for the 1982 model year. In Japan, they were known as the Celica XX, but the Celica Supra name was used for the world market. Still based on the Celica platform, there were several key differences, most notably the design of the front end and fully retractable pop-up headlights. Other differences were the inline-six rather than four-cylinder engine, as well as an increase in length and wheelbase to accommodate the larger engine. Cars installed with the 5M engine were slightly wider, while other models remained compliant with Japanese dimension regulations.

MK3

In February 1986, the bonds between the Celica and the Supra were cut; they were now two completely different models. The Celica changed to a front-wheel drive layout, using the Toyota "T" platform associated with the Corona, while the Supra kept its rear-wheel-drive layout. The engine was updated to a more powerful 2,954 cc (3.0 L) inline-six engine rated at 149 kW (200 hp; 203 PS). Although initially only available with naturally aspirated engines, a turbocharged version was added in the 1987 model year. The Supra was now mechanically related to the Soarer.

MK4

The A80 program began in February 1989 under various teams for design, product planning, and engineering led by Isao Tsuzuki. By the middle of 1990, a final A80 design concept from Toyota Technical Centre Aichi was approved and frozen for production in late 1990. The first test mules were hand-built in A70 bodies during late 1990, followed by the first A80 prototypes being hand-assembled in 1991. Again using subframe, suspension, and drivetrain assemblies from the Z30 Soarer (Lexus SC300/400), pre-production of the test models started in December 1992 with 20 units made, and official mass production began in April 1993.

MK5

The Supra is powered by two BMW-sourced engine options: a turbocharged 2.0-litre inline-four or a turbocharged 3.0-litre inline-six engine. The North American market did not receive the 2.0-litre engine option until mid-2020, for the 2021 model year. The 2.0-litre engine has variable power outputs of 145–190 kW (194–255 hp; 197–258 PS) from 4,500 to 6,500 rpm or 5,000 to 6,500 rpm and 320–400 N⋅m (236–295 lbf⋅ft) of torque from 1,450 to 4,200 rpm or 1,550 to 4,400 rpm, while the 3.0-litre engine has a power output of 250–285 kW (335–382 hp; 340–387 PS) from 5,000 to 6,500 rpm or 5,800 to 6,500 rpm and 495–500 N⋅m (365–369 lbf⋅ft) from 1,600 to 4,500 rpm or 1,800 to 5,000 rpm, with power sent to the rear wheels through a ZF 8HP 8-speed automatic transmission.